Ridge and Valley T.U. Fly tiers round table, Sulpher Emerger video

   Well last evening was my T.U. chapters second tiers round table meeting. It was a good turn out for the event.  At the meeting I demoed and gave instructions how to tie a great emerging  sulphur soft hackle that I have been tying and using for some time. The fly can be fish dead drift in the film, bounced on the bottom, fish as a dropper off a dry fly and on the swing. A leisenring lift is particularly deadly with this fly. 

Special thanks to the M.W.A. for allowing us to use there amazing building check them out Musconetcong water association

Here is the video of the fly I last night, and thanks to everyone for coming out. Hope to see you all next month! Enjoy the video.
Materials
Hook- Daiichi 1110, 1180, 1560  sizes 14 and 16
Thread- Uni- 8/0 Light cahill.
Tail- Pheasant tail fibers
Rib- Tag of tying thread
Abdomen- Pheasant tail
Thorax- Lite yellow U.V. Ice dub.
Hackle- Dun hen neck hackle ( Whiting hen is great for this pattern as it will help the fly stay in film)

Lessons in the fly corner

Well Josh was out to the fly corner this morning for and I taught him how to tie the U.V. Diamond scud, the High Test Hares Ear and .......... The Golden Oldie!!!!!!!  Well hell he has been fishing the fly since i devised, so its only right he should know how to tie one!  Great Job Josh.

Dark Star tutorial (step by step)

The Dark Star Dun
Materials
Hook- Daiichi 1180 or 1110 #12-20
Thread- Tan 8/0
Wings- Black hen hackle tips
Tail- Sandy dun hackle fibers
Abdomen- Stripped peacock quill
Rib- Small Opal tinsel
Thorax- Dyed black peacock hurl
Hackle- Sandy dun.

Start the thread and wrap half way down the shank.

Then wrap the thread half way back up. This will give your wing placement.

Select 2 hen neck hackle tips, pair them up and line up the tips. Measure your wings to be the same length as the hook shank.

Pinch and loop the wings to the top of the shank. Take a couple additional turns to secure, wrapping back touching turns as you secure. Then snip the waste.

Wrap back over the butts touching turns to just before the barb.  Dont worry about standing the wings up yet. They will just get in the way.

Take 6-8 hackle fibers and tie them in for the tail. Take one turn on and one under then one to secure.

Tie in a stripped quill by the skin on the butt end with one turn.

Tie in the small opal tinsel, and advance the thread to about a hook eyes back from the wings.

Wrap the quill forward touching turns.

Now rib the body with the opal tinsel,  3-4 turns is enough. Blurry??? yeah sorry about that.  Now before you stand your wings, put a light coat of varnish/head cement on the body. Be sure to get a bit on the under side of the hook bend to anchor the varnish. This helps make it much more durable.

Now stand the wings up by pulling them up with your finger and thumb and putting wraps right in front of the wing base.

Select a hackle and tie the butt end in in-between the wings. This help keep them split.

Tie in a dyed black peacock hurl by the tip and bring the thread in front of the wings.

Wrap the peacock hurl forward, touching turns and just take one turn in front of the wing.

Now wrap the hackle, take two full turns behind the wing and 1-1 1/2 in front of the wing. 

Whip Finish and your head and the Dark Star is complete.   For flatter water cut a V into the bottom of the hackle. 

The Dark Star Tying video

Here it is, The Dark Star Tying video,  Enjoy.

The Dark Star dun

  I have posted about this fly in some of my fishing reports and never put a photo up.  This fly has worked extremely well for me.  I have used it all over the place, from limestone to freestone, it just works. 
  In high glare situations this fly shines as the black wings are easy to see in this situation. I will confess that there are some times when the black wings are next to impossible to see, but the lighter colored hackle(sandy dun) makes the fly visible at those times. 
  The video is currently uploading and will be on youtube late tonight. I will have it on here in the morning.



Materials
Hook- Daiichi 1180 or 1110 #12-20
Thread- Tan 8/0
Wings- Black hen hackle tips
Tail- Sandy dun hackle fibers
Abdomen- Stripped peacock quill
Rib- Small Opal tinsel
Thorax- Dyed black peacock hurl
Hackle- Sandy dun.

Remember......Its wild brown trout approved!!!!!!!!!

Hendrickson Nicheo Video

Here is my latest video. It is of how I tie my Hendrickson Nicheo. I used it this month the few times I got and it worked very well. Enjoy

Spring session 4, Caddis and wild browns

  Well everyone this post was suppose to have gone up last Friday, but i have been very busy lately with work.  None the less i still have this session fresh in my mind. I got out late morning to my favorite freestone stream and upon my arrival I saw the trout rising.  I had tied on the Hendrickson Nicheo dun to the end of my line. I made my first cast and was awarded with a healthy hard fighting wild brown.  I got a couple more from the first run I hit. Then I moved up stream, casting at the occasional rise and likely areas. I managed a few more on the way the up.  I came up to spot that has always given up a large wild brown. I watched patiently in hopes to see a rise. Then, there was a large nose that came up in the film.  I got into position, and sent a drift.  It was just a tad to the left, so i sent a second.  The trout took the Nicheo without hesitation and man did my reel sing when i lifted the rod. The fight lasted for several minutes, as there wast much of current in the area to ad in tiring the trout. The trout dogged down in a deep cut and then, POP, went the hook.  Bummer. 

     I regrouped and moved up a bit, I watched a nice seem with the ever so popular white bubble flowing down. I saw a rise, then another, but this one had a big nose, just like the previous trout.  The story repeats, in that my first cast was just to the right, and the second resulted in the reel screaming. I hook this trout in about 8" of water at the very head of the run. He took off running down to the deep cut that the other one dogged me in. I applied the brakes and was able to get him turned around.  My position this time had currents to my favor. I was able to tire the trout out so i could make the landing rather quickly.

  After releasing the brown, I figured I was good. Only fished for a little over an hour but it was a blast.  There where quite a few different bugs hatching and laying eggs. Caddis, gordons, bwo, hendricksons and even the Jersey skeeters(crane fly) were out in good numbers.   So with "more than four" I headed on back to the car.

Spring session 3, some birthday trout.

  Well on Thursday it was my birthday, and I got out for some flying for wild browns as usual.  The bugs were hatching and first I hit my local spring creek for some action.  The trout were rising all over the place to bwos, caddis and midges.  I know that the stream has a few hedrickson in it so i figured the fish would be on the look out for them. I tied on the Hedrickson nicheo dun and rather quickly i was into my first wild brown of the morning. I got several more before Josh call to meet up for a session, so off to Pa i went to hit my favorite freestoner. Here the caddis were coming off heavy and egg laying as well. However the trout were defiantly more interested in the mayflies coming off sporadically. The hendrickson nicheo did the trick.  We both did well and before i knew it, it was time for me to head out.  All in all it was a great B-day fishing session.

A true master of the thread does the sawyer pheasant tail

Here is Mr. Davy Mcphail doing the sawyer pheasant tail.  Give them a go, they sink like rocks, but catch fish better than rocks do! Enjoy.

Cream midge

  Some people like tying flies to look at such as Atlantic salmon flies and the likes, but well I like tying flies that are hard to see! I very much enjoy the art of tying small flies, and I do it quite often.   Here just a  simple cream midge i tied recently.   

 Hook- Mustad 94859-#28

Thread- Uni trico thread

Body- tying thread

Hackle- Whiting bronze grade neck hackle cream

Fly tying video lessons for begginers.

I am doing a video series for beginner tiers and this is video number 1. It is a green rock worm. Very simple and easy tie.
 This fly will teach you how start the thread, the pinch and loop technique to attach materials and wrapping materials.
Hook- Curved shank hook sizes 10-16
Thread- Black 8/0 uni
Body- Chartreuse or a bright green yarn
Rib-Black utc brassie
Thorax- Peacock hurl. 

Here is video 2 a simple midge pupa, This fly will teach you the basic dubbing technique and soft loop for attaching materials.
Hook- Dry fly hook or Nymph hook sizes 14-24
Thread- Uni black 8/0
Body- tying thread
Rib- Red utc wire
Thorax- Muskrat dubbing

Here is video 3, the griffiths gnat.  This fly will teach you how to palmer hackle.
Materials- Dry fly hook 10-26
Thread- Uni 8/0 black
Body- peacock hurl
Hackle- Grizzly neck hackle, saddle will work also
Rib- copper wire utc, or silver. xsmall

Lesson in the corner

   Today was a different day the usual in that Josh came to the fly corner for a fly tying session. He has never tied before and it was my honor to give him a tying lesson.  I was very impressed with how well he picked up on the task at hand.  I had him tie first a rock worm, then a fancier rock worm with a rib. Then a ultra fancy rock worm with rib and soft hackle.  We then moved onto Griffiths gnats, and finished up with his request of parachutes. I had him tie a pheasant tail parachute.  Great job Josh!!!!!!!!!

Josh's First fly ever

Second fly

3rd fly

4th fly.

5th fly

6th

7th fly

Dying stripped quills

I made a video on how I dye my stripped herls a nice bwo olive.  Its very simple to do and can be fun to do.