The peeking caddis tutorial and video

This is the peeking caddis pattern which I use. It extremely effective on freestone streams with good populations of caddis.  You can twist these up pretty quickly. They are simple yet very effective.

Recipe
Hook- Daiichi 2220 #14
Bead- Tungsten 3mm
Thread- Uni 8/0 tan or camel
Larva- Sparkle yarn
Legs- Partridge
Case- U.V. High Test Dub

Lets twist one up.

Hook in vise with 3mm tungsten bead

Start your thread and wrap back to the bend

 

 

Cut yourself a piece of sparkle yarn and get your lighter

Light the end of the sparkle yarn

You want the yarn to catch fire. Let it burn for a second or two.

Blow the flame out and let it cool. It doesn't take long. Now you have a nice caddis larva head.

Tie in your larva. I like to do about a half a hooks worth of larva. Tie it in and bind it down up towards the bead. Cut the excess.

Select a partridge feather and tied it in by tip. I like to only have the ends of the barbs extend to the end of the sparkle yarn. So measure and tie it in so the once wound the tips will only go that far.

Wrap your partridge.  And then advance your thread to the rear, tying down the partridge fiber.

Make a dubbin look and apply your dubbin, twist and make a nice shaggy rope.

Wrap your dubbin rope forward and tie it off.

 Whip finish, and then i like to trim down the shag to form a  nice shape.

Enjoy the movie

Tight Ties

Johnny Utah

Tying video, Fancy Brassie

I made a video on the Fancy brassie.  Twist these up in small sizes and fish them as a dropper. There very effective in other colors also, with ultra wire you can tie them in any color of the rainbow.  Use medium wire for 16s and use small for 18s and 20s. If you want to go smaller then give the x-small wire a try.  You dont have to use peacock or any collar at all. Just a black thread head works well.  If you do use peacock  use hurls from the eye. You can get some nice short fibers from the center eye area.

 Tying a two minute fancy brassie

 Tying the Fancy Brassie (full instruction)

A deadly stockie fly. The Infamous Pink Worm Tutorial

The infamous Pink Worm.  This fly is beyond deadly on stocked fish. especially rainbows. Tie these babies up if you like fishing for those synthetic fish. Tie them on a diesel hook for a killer steelhead pattern.


Materials
Hook- #14 dry fly hook
Red uni-6/0
Body- Florescent pink Vernille
Body- Steel Head Orange Glo-bug yarn


start your thread, and run it down to the hook point.


Tie in the vernille, Use two secure wraps, one on top of the other. Then advance the thread forward, stop two hook eyes back from the eye.


dub your thread, don't be shy and don't be ridiculous.  This right here is the exact amount to make a great body ( I have tied hundreds of these.  )


wrap your body. Wrap back, forward, back 3/4 quarters then forward.


Tie down, the vernille over the top, with two tight wraps, Then whip finish in front of the vernille.


take a lighter and singe the ends of the vernille.


How to fish the fly properly

Small shot about 8" above worm, size and number to suit water conditions. You want it on or near the bottom. Fish dead drift. Takes usually are gentle as the fish just suck the worm in. If you are sight fishing, drop worm above to slightly to side of fish and try to stop it on the bottom, near the fish. They will move to pick it up.

Tight Ties
Johnny U.

The mayfly cripple tutorial

This is a DEADLY pattern if you tie it correctly.  I will tie a bwo in this one. You can change the dubbing, thread, and hackle color to match the naturals. With hackle, I have found that you can go wrong with dun. No matter what natural your imitating. This is the standard mayfly cripple. I learned of this pattern through Mike Lawson.


Materials-
Hook- any dry fly hook, one size larger than the natural.
Thread- color to match the naturals.
rear body- brown/rust marabou, and pheasant tail.
Rib- copper wire. Medium for 12-14, small for 16-20 and ex small for 20-and up.
thorax- super fine dubbing, color to match the naturals
Hackle- Neck hackle dun or a color to match the naturals. You can use saddle but I prefer neck for this because its not as stiff as saddle, allowing the fly to really nestle down in the film.
Wing- Deer hair, natural or dyed dun.


Hook in vise, start your thread and take it back to the barb.


Tie in your marabou by the tip, and pheasant tail, sparse is good! Make a very short tail. Tie in the marabou first and then the pheasant. You can break the marabou to adjust its length. Bring thread forwards, stop a little past half. (WET YOUR BOU, IT WILL SAVE YOU MUCH AGGRAVATION  )


Tie in wire, bind it down on top and back just past your bou and pheasant.


Make a loop with the wire. Bind down the wire a quarter the way up. THIS STEP IS A MUST FOR THIS PATTERN TO SIT PROPERLY IN THE WATER. IF YOU DO THIS STEP YOUR FLY WILL LAND THE ON THE WATER RIGHT EVERY TIME.


Put your bou and pheasant in the middle of the loop on top. Take you twister and from right to left go, under the wire over the bou and pheasant and hook the wire on the other side(Left). This will ensure you catch and bind the material in between the wire.


Twist it. Be sure you twist until the wire is spun right to the tie in points. Be careful not to go to much and break the wire.  You get a very nice "buggy" dubbing brush.


wrap it up, until the point where you tied in the wire. Tie it off on top.


Cut off your excess. I use wire nippers, I don't recommend using your scissors on the wire. You can also bend and break the wire and then simple cut the bou and pheasant, if they didn't break away with the wire. Then tidy up. advance down to the eye and back to the tie off point.


Dub your thread nice and tight. Wrap over the tie in and forward a mil or two.


Tie in your deer hair, This step is very similar to tying in a caddis wing. Tips forward of the eye. Keep the tips short going in front of the eye. Hold the deer hair on top and bind down towards the eye. Don't allow it to spin. Leave yourself a hook eye worth of shank behind the eye. Take two three wraps in this area for your anchor wraps, so your deer hair wont spin. Bring the thread back to the tie in point.


Trim your deer hair butts. Leave about two to three mil of butts, this will help balance the fly and will simulate a wing case busting open.


Tie in your hackle. I like to have the feather good side up. advance thread forward and stop at the the butts of the tips of the deer hair. Wrap your hackle. You only need TWO wraps, NO MORE. Tie off behind the deer hair tips, then lift the tips and bring your thread onto the hook shank and tie off. Whip it Good.


The result. a deadly mayfly cripple.


This is how the fly will land and ride. The hackle will hold it in the film, while the lower half (the nymph) rides just under the film. You will see the deer hair wing sticking out of the water.

Tie these guys up, Fish'em, you wont be sorry.

Tight Ties everybody.
Johnny U.

Magic tool, Creativity, and some new flies.

I have owned a MP magic tool for what seems like forever. I never really used it. Its a very simple tool set that like all MP tools seems over priced. Its certainly worth the investment. I like it for making simple hackle collars.
I sat down a decided I would design some soft hackle flies. I love to use cdc for soft hackles. It is my favorite next to partridge. So with the magic tool and some cdc I got started.................

The batch

The Atomic caddis

F3

F3

F7

G4

Sealy Rocko Wormy

 Now its just a matter of testing how effective they truly are...............I'll find out.

How to make custom dubbing blends.

Hello fellow tiers!!!!

Making dubbin can be fun. It is a great way to make blends of your liking. If you have ever seen a real insect than you know that they are not a consistent color. It doesn't take much, just a simple electric coffee grinder will do the trick. Furs from any animal. Yarn of just about any kind. Even marabou (AWESOME DUBBING)

For furs my personal favorites are rabbit, both mask and body hair. Body under fur is one of the softest and easiest dubbin around. When treated with a water proofing agent ie floatant it will float all day. Body fur with guard hairs makes awesome nymph dubbing that is extremely easy to dub. Squirrel of any variety. Squirrel makes great spiky nymph dubbing. Australian opossum is great nymph dubbing. Seals fur is great emerger dubbing. Which really goes well in dubbing blends. Muskrat is great nymph dubbing and also dry fly dubbing. Beaver makes great dry fly dubbing as well. 

Yarn of just about any sort. Check out whats on sale at the craft store or mega stores and pic out some colors you like.Its very easy to make yarn into dubbing. You can get wools and synthetics. Synthetics in the craft world they are acrylics.

Marabou from feathers and actual marabou makes some awesome dubbing. When you pluck those hackles don't just throw away that butt or strip it away. Instead cut it away. Store them in a bag or container and when you have accumulated a bunch simple trim the marabou from the stalk. DON'T strip it or you will up with the stems skin, which will not blend or dub so well.

Flash materials can be picked up via yarn or just picking up some packets of ice dub, polar dub, sts, antron and so on. My favorites are ice dub u.v., polar dub, and sts. The bags you get will make tons of blends. So they are well worth the couple of bucks.

General materials list.
1- Electric coffee grinder. Wally world has a great one and its cheap.
2- Scissors.
3- Fur, yarn, Marabou, Flash materials.
4- dryer sheet or static guard- this is to help with static cling, not necessary but very helpful.

Tools. The coffee grinder is a wally world one, works excellently. I like the large scissors as you can get more with just a cut

Ok lets do a blend! This is one my favorites, its a great olive blend for caddis and various nymphs

Materials-caddis green polar dubbing, an olive hare's mask, and caddis green sts


Cut a small amount off the hares mask. If you want extra coarse dubbing cut in some ear hairs.

load it into your grinder, and give it a few pulses of about the count of 1,2 and stop. Repeat. It will then look just like dubbing in a bag, but fluffier. This will help us add the flash materials. The grinder will chop up your fur if you let it run to long.

Take out about 3-4 pinches of flash, about this much will do nicely. Add them to your hair that you have blended. Just dump the sts right in. Its a short cut dubbing so it will come apart and blend easily. The polar dubbing is a long cut dubbing. You will need to tease it out and put it in. Once you have them all in, give it several pulses of 1 and 2 and stop. Any time you use synthetic in your blender never blend to long or will end up with little plastic balls.


The result. A buggy, flashy but not to flashy, easy to dub blend
As you can see it is quite simple. Have fun creating your own custom blends.

Tight Ties
Johnny Utah

Wild trout steam report 9/13/11

Well after getting some fly orders tied and in the mail. I met up again with Mr. George from Wild Fly 365. We hit my local spring creek for some wild brown action. The creek is still flowing high, but the water is clear once again. We nymphed, and worked are way up stream. We fished about 1/10th of mile of the stream.  We got into browns rather quickly. Mr. George was using a Golden Oldie and his hybrid hares ear. I was using the Golden Oldie followed by an improved zuggy. I love zug buggin. Hands down the oldie was the winner. The zug got a few.

I got two wild browns on at the same time. One on the oldie and the other on the zug.  Needless to say I was rather surprised as I haven't done this with wild trout before, stockies a couple of time, but not wild.  Mr. George got a picture of it.

Several of the trout we caught came on the lift.  We noticed some mayflies hatching sporadically. There wasn't enough to get the fish up, but it would seem they were keyed in on the emerging bugs because the lift worked well.  With "more than four" and stomachs complaining, we headed back to the vehicles and off to Charlies Pool Room for the best hot dogs in existence!

The Top Secret Midge and Blue Quill Angler

The top secret midge is a midge pupa pattern that was developed by guide Pat Dorsey of the Blue Quill Angler in Evergreen Colorado. I love to fish this pattern on the lime in PA. When it's tied very small it cleans up.  I fish the pattern tandem on nymph rigs, as a dropper on dry drop rigs, and I fish it solo on a greased leader. I havent found a way that it isnt effective.

The Blue quill angler is great shop out in Colorado. They have a fantastic staff and unbeatable customer service. They have a great online fly shop  HERE. They offer free shipping on order over $5. Yes that is correct.  They have fair and competitive prices and good selection of materials.  You can pick up wing material for the top secret HERE, or you pick up some all ready twisted top secrets HERE.                                                                The above top secret twisted by Dorsey.

Heres a pair I twisted up. Ones got rusty brown superfine for the thorax region and the one to the left here has dark brown stella dub. I use grey thread for the rib instead of white.  Use white if you want a very translucent rib. The white pretty much vanishes.  One both I used dark brown uni thread, top secret wing material and Dai-Riki 125 hooks.  All the materials are availble at the blue quill angler fly shop.

 Heres a video on how to tie Dorsey's Miracle Nymph

Tight Ties 

Johnny Utah

Goosy adams parachute

Here is a version of the adams I put together some time ago. It works just as well as any adams. It has caught me some very selective trout though, that refused a standard adams parachute.  I tie this fly on light wire scud or emerger hooks. This one is tied on a daiichi 1130. I tie and fish them in a range of sizes. Really small ones are very effective.  The abdomen of the fly is fibers from a grey canadain goose feather. I wrap them so the under side of the feather is shown on the shank. I then rib the abdomen with dark grey montana midge body thread. It gives it some flash. The abdomen I use grey stella dub.  The post is siliconized poly yarn. And the hackle is your standard hackle for the adams, grizzly and brown.

Tight Ties everyone.

Floating nymph 2

The pheasant tail nymph is a deadly nymph for sure, but an equal to the famous pheasant tail, is the Gold ribbed hares ear nymph. The hares ear  also makes a great floating nymph. Its very productive and can be effective in a range of sizes from 12-22 and im sure it would work well if you can manage to tie it smaller as well.  In this video I twist one up with a hi-vis post of hot pink parapost. The dubbin I use is my  U.V. High Test. I have been using this dubbin for this pattern for some time now and it does seem to give it an edge over your average parachute hares ear.  All parachute flies no matter the pattern are emerger flies. And we all know how effective emergers are thanks to Carl Richards and Doug Swisher.  Twist these guys up and give them a try.

A Throw back and a lesson remembered

I did a video of an old pattern. One that has caught myself and so many others so many trout. I did the old school ant, but of coarse I used synthetic dubbin. I tied up a batch of Cinnamon ants, because I am going to fish a spot on a spring creek that I know the trout there get a regular diet of cinnamon colored ants.

Ants of this color are always small, well at least were I am from. They usually are between a 22- 26. I tie them in size 28 as well. If the trout are being picky, the smaller sizes are required.  In the video I tied a Huge one so the video would be clearer. I also tie these tiny ants in dark brown. This color represents the common ants that you see all the time. Yup they to fall in the water and become pray to the trout. The browns I tie in the same sizes.

I need to fire up the dye bath, to dye some tiny hackles red. There is an ant, one I have only ever seen on two streams. One in New Jersey and the other in P.A.. The body on these ants is the same color as trico, a super deep brown, pretty much black. The kooky thing about them is they have bright red legs. Weird looking they are for sure. But the trout are aware of them and they do look for them. I discovered these ants one July morning some years ago. I was fish the trico hatch and there was a rather large trout sipping occasionally. He was my last trout catch, I got the others, and put the rest down from catching them. I drifted my trico over that trout several times without even a look. I swapped patterns, going through my trico arsenal, and nothing.

I stood and watched the trout feeding. The rises were not in any kind of timing, but they were sipping rises just like the trout was taking spinners.  I got my binoculars out of my car and peered at the film, I could see trico spinners, drifting right over the trout.  I noticed a smiggin a extremely small bug on the water, smaller than the tricos. The trout came right up and took it. I thought hmm perhaps it was a midge or maybe an ant. I tried a griffiths gnat #26, the trout looked but no take. He didnt look again. I swapped out for the old timely cinnamon ant. I tied the size 26 ant on the line and cast it over him, it came into his window and he came right and sipped it right in, or so it appeared. Once I got the trout in, I saw he was fowl hooked. By chance i managed to hook him on the top of his head. Hey you try and keep track of a size 26 ant 15ft away. lol

 Once he settled and I removed the hook from his head, I pumped his throat. I had to see what he was eating. To my surprise, I pumped out a mess of the dark, red legged ants, and just a couple of small cinnamon.  I have a huge arachnophobia, I mean I will scream like a little girl when a big spiders on me. When i pumped the throat load on my hand, I could of swore those little ants were spiders. I nearly threw it right in the stream.  Upon closer inspection i noticed only six legs, but they were red.  I went home and picked a mess of hackles off the white neck i had and dyed them red.

Two weeks later later I returned to this stretch of stream with my hatch matching ants. I thought well they should work.  I had tied a couple up parachute style and a couple the old way. I tried the parachutes first. Not even a look. Hmmm. I put a trico on and started catching fish.  I got down near the area where I had the run in with that selective trout. A couple of trout were rising under the large sycamore. I watched the fish for a short while. I noticed one rising that was certainly larger then the rest. I set my trico a drift to him. He refused it. I tied on the old school red legged ant. Sent it a drift, and nose up, dorsal, tail, he was one. A great fight with a 17" wild brown. After I released him, I made my way back up to the fish that refused he parachute. There were some which didnt want my trico, and I wondered if they would take the ant.  I got every one of them with it, one the first drift to them. From that day on, I always carry red legged ant, tied the traditional way.

Heres a video of the traditional fur body ant. As I said earlier, its a large cinnamon. I tie the red legged ants to small for video. And I dont have a pic because as I stated earlier, I need to fire up the dye bath and dye some size 26 hackle red.